OOKB - Olaf's Own Knowledge Base

User Tools

Site Tools

Trace:
arduino:installation_ide

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
arduino:installation_ide [2023/08/21 05:45] – olafarduino:installation_ide [2023/08/21 05:49] (current) – olaf
Line 11: Line 11:
 Close the IDE and copy the esptool too the location the program expects it: Close the IDE and copy the esptool too the location the program expects it:
  
-<code>  +<code>md C:\Users\olaf\AppData\Local\Arduino15\packages\Heltec-esp32\hardware\esp32\0.0.8\tools\esptool
-md C:\Users\olaf\AppData\Local\Arduino15\packages\Heltec-esp32\hardware\esp32\0.0.8\tools\esptool+
 xcopy C:\Users\olaf\AppData\Local\Arduino15\packages\Heltec-esp32\tools\esptool_py\3.3.0\esptool.exe C:\Users\olaf\AppData\Local\Arduino15\packages\Heltec-esp32\hardware\esp32\0.0.8\tools\esptool\  xcopy C:\Users\olaf\AppData\Local\Arduino15\packages\Heltec-esp32\tools\esptool_py\3.3.0\esptool.exe C:\Users\olaf\AppData\Local\Arduino15\packages\Heltec-esp32\hardware\esp32\0.0.8\tools\esptool\ 
 </code> </code>
  
 The IDE is now ready for the Heltec ESP32 boards. The IDE is now ready for the Heltec ESP32 boards.
arduino/installation_ide.1692596702.txt.gz · Last modified: by olaf

Page Tools